DG02
Display Glassic style, 3-digit, 50 mm, dot matrix, 1toX-line
|
|
To help the customers' orientation the counter displays can be mounted above or beside the counters, optionally stainless steel tube (ODP05) can be used to fix it onto the table or on the ceiling.
The display consists of three digits (50 mm, 5 x 7 dot matrix); the color of the display is bright red.
At calling, the ticket number is blinking e.g.: for 30 seconds (blinking time can be adjusted in the Q-net software) on the display.
The number is shown on the display as long as the CLOSE button on the calling unit has been pushed.
The DG56 display can swap between showing Arabic and English numbers, the swapping time can be adjusted in the Q-net software.
The DG02 display is available for Q-net Basic, Basic Plus, Standard and Pro systems.
The DGXX displays are fitting to ticket dispensers in the same design style. (TG01, TG02, TG03, TG10, TG13,TG14)
Dimensions:
Height: 160 mm
Width: 174 mm
Depth: 50 mm
Power requirement: 12V
DC 500mA
* = only English numbers

|
|
|
 |
|
|
|
|

|
DG02
Display Glassic style, 3-digit, 50 mm, dot matrix, 1toX-line
|
|

|
DG01
Display, Glassic style, 3-digit, 57 mm, 7-segment, 1toX-line
|
|

|
DG05
Display Glassic style, 5-digit, 57 mm, 7-segment, 1toX-line
|
|
|
 |
DG05
Display Glassic style, 5-digit, 57 mm, 7-segment, 1toX-line
|
 |
In a smaller waiting area where the waiting customers are close to the display, DG05 can be a low-cost solution.
The display consists of five digits (57mm, seven segment units); the colour of the first 3 digits (for ticket number) is red the two digits are green (for counter number). At calling, the numbers are blinking e.g.: for 30 seconds (blinking time can be adjusted in the Q-net software) on the display.
Displays are delivered per lines, therefore they can be mounted under each other.
In case of more than one line of display, at calling the next customer the information of the last customer will jump a line lower, while the top line is blinking.
The DG05 display can be also used for counter display purpose, as an alternative of DG01.
At calling, the ticket number is blinking e.g.: for 30 seconds (blinking time can be adjusted in the Q-net software) on the display. The number is shown on the display as long as the CLOSE button on the calling unit has been pushed.
The additional two characters in green will constantly show the number of the counter as long as the clerk is logged in.
The DG05 display is available for Q-net Basic, Basic Plus, Standard and Pro systems.
Upon request DG05 can be delivered with a buzzer to give sound signal at calling.
This unit is designed in the style of the "Glassic" ticket dispensers, it reflects the "Glassic" design elements in order to use both elements in the same system.
The DGXX displays are fitting to ticket dispensers in the same design style. (TG01, TG02, TG03, TG10, TG13,TG14)
Dimensions:
Height: 160 mm
Width: 320 mm
Depth: 50 mm
Power requirement: 12V DC 500mA

|
|
|
|