 |
|
|
|
|
|
|
DG05
Display Glassic style, 5-digit, 57 mm, 7-segment, 1toX-line
|
|
|
DG55
Display Glassic style, 5-digit, 100 mm, 7-segment, 1toX-line
|
|
|
DG56
Display Glassic style, 5-digit, 100 mm, dot-matrix, 1toX-line
|
|
|
DC55
Display, Classic style, 5-digit, 100 mm, 7-segment, 1-line
|
|
DC56
Display, Classic style, 5-digit, 100 mm, dot matrix,
1-line
|
|
|
DC92
Display, Classic style, 19"-LCD
|
|
SH06
Q-net Media player software
|
|
|
 |
DG55
Display Glassic style, 5-digit, 100 mm, 7-segment, 1toX-line
 |
 |
The DG55 waiting area display shows summarized information about ticket numbers and counters, as the other waiting area displays. The first three character of the five character waiting area displays are showing the number of the ticket that has been called, the following two characters are the number of the counter waiting for the customer.
Displays are delivered per lines, therefore they can be mounted under each other.
In case of more than one line of display, at calling the next customer, the information of the last customer will jump a line lower, while the top line is blinking.
The colour of the display digits is red. The waiting area display is blinking for around ten seconds after the call (The blinking time can be adjusted in the Q-net software).
DG55 is also available with dot matrix displays for Arabic numbers (DG56, see there).
The DG55 display can be installed in Basic, Basic Plus, Standard and Pro systems.
This unit is designed in the style of the "Glassic" ticket dispenser, it reflects the Glassic design elements in order to use both elements in the same system.
The DGXX displays are fitting to ticket dispensers in the same design style. (TG01, TG02, TG03, TG10, TG13,TG14)
Technical details:
Size of 1 character: 70
x 100 mm
7 segment
Red LEDs
Up to three display lines
Dimensions:
Height: 185 mm
Width: 605 mm
Depth: 70 mm
Power requirement: 12V DC 1A/line
|
|
|
DG56
Display Glassic style, 5-digit, 100 mm, dot-matrix, 1toX-line
|
|
The DG56 (5x7 dot matrix) waiting area display shows summarized information about ticket numbers and counters, as the other waiting area displays. The first three character of the five character waiting area displays are showing the number of the ticket that has been called, the following two characters are the number of the counter waiting for the customer.
Displays are delivered per lines, therefore they can be mounted under each other.
In case of more than one line of display, at calling the next customer, the information of the last customer will jump a line lower, while the top line is blinking.
The colour of the display digits is red. The waiting area display is blinking for around ten seconds after the call (The blinking time can be adjusted in the Q-net software).
The DG56 display can swap between showing Arabic and English numbers, the swapping time can be adjusted in the Q-net software.
The DG56 display can be installed in Basic, Basic Plus, Standard and Pro systems.
This unit is designed in the style of the "Glassic" ticket dispenser, it reflects the Glassic design elements in order to use both elements in the same system.
The DGXX displays are fitting to ticket dispensers in the same design style. (TG01, TG02, TG03, TG10, TG13,TG14)
Technical details:
Size of 1 character: 70 x
100 mm
7 segment
Red LEDs
Up to three display lines
Dimensions:
Height: 185 mm
Width: 605 mm
Depth: 70 mm
Power requirement: 12V DC 1A/line
|
|
|
|
DG05
Display Glassic style, 5-digit, 57 mm, 7-segment, 1toX-line
|
|
In a smaller waiting area where the waiting customers are close to the display, DG05 can be a low-cost solution.
The display consists of five digits (57mm, seven segment units); the colour of the first 3 digits (for ticket number) is red the two digits are green (for counter number). At calling, the numbers are blinking e.g.: for 30 seconds (blinking time can be adjusted in the Q-net software) on the display.
Displays are delivered per lines, therefore they can be mounted under each other.
In case of more than one line of display, at calling the next customer the information of the last customer will jump a line lower, while the top line is blinking.
The DG05 display can be also used for counter display purpose, as an alternative of DG01.
At calling, the ticket number is blinking e.g.: for 30 seconds (blinking time can be adjusted in the Q-net software) on the display. The number is shown on the display as long as the CLOSE button on the calling unit has been pushed.
The additional two characters in green will constantly show the number of the counter as long as the clerk is logged in.
The DG05 display is available for Q-net Basic, Basic Plus, Standard and Pro systems.
Upon request DG05 can be delivered with a buzzer to give sound signal at calling.
This unit is designed in the style of the "Glassic" ticket dispensers, it reflects the "Glassic" design elements in order to use both elements in the same system.
The DGXX displays are fitting to ticket dispensers in the same design style. (TG01, TG02, TG03, TG10, TG13,TG14)
Dimensions:
Height: 160 mm
Width: 320 mm
Depth: 50 mm
Power requirement: 12V DC 500mA
|
|
|
|
|
